[sztain]

I am making these legwarmers for my granddaughter. https://knitty.com/ISSUEspring08/PATTmosey.html?fbclid=IwAR0YWProMx8-wEEYHgLduPipDlKWBNa_rCIHk6KMzx9etPuyYWvCWyzQPoA. The name of the pattern is mosey legwarmers by knitty.
DIRECTIONS
RIGHT LEGWARMER
CO 76[108] sts. If using double-point needles, divide sts between needles.

Place marker and join to begin working in the round, being careful not to twist.

Work in 2x2 Rib until work measures 3 inches.

Eyelet Round: Work 24[36] sts in pattern, k2tog, yo, p2, yo, k2tog, continue in pattern to end.
Continue in 2x2 Rib until work measures 9 inches.

Next Round: [M1, p38(54)] twice. 78[110] sts.
K 1 round.

Next Round: [P2, k2] once[twice], work Back Panel over next 12 sts, [k2, p2] once[twice], k2[3], work Cable Pattern over next 54[76] sts, working pattern repeat section 2[3] times, k2[3]. This round establishes pattern for legwarmer.

Continue in pattern until all rounds of Back Panel have been worked 3 times, then work 1 round more (Round 1 of Back Panel); you will have just completed Round 7 of Cable Pattern.

K 1 round. P 1 round.
BO all sts.
I am stuck on the eyelet round, after doing the 3 inches in rib. Do the directions mean to knit only one row or do you think it means to do the 20 row cable pattern?
Cable Pattern
(Worked over a multiple of 22 sts + 10):
Rounds 1-5: P2, k6, p2, [k12, p2, k6, p2] to end.
Round 6: P2, C6B, p2, [k12, p2 C6B, p2] to end.
Rounds 7-10: Work as for Rounds 1-5.
Round 11-15: K10, [k1, p2, k6, p2, k11] to end.
Round 16: K10, [k1, p2, C6B, p2, k11] to end.
Rounds 17-20: Work as for Rounds 11-15.

 

[targa416]

One eyelet round (most likely to thread the cord through later).

Quote from pattern:

Eyelet Round: Work 24[36] sts in pattern, k2tog, yo, p2, yo, k2tog, continue in pattern to end.
Continue in 2x2 Rib until work measures 9 inches.

 

[sztain]

Thank you

 

[lovelandjanice]

Looks like you are going to make two eyelets for the ICord to thread through when finished.
You need to do only one eyelet row which will give you two eyelets. Then continue with ribbing.

 

[sztain]

Thank you

 

[JTM]

I am making these legwarmers for my granddaughter. https://knitty.com/ISSUEspring08/PATTmosey.html?fbclid=IwAR0YWProMx8-wEEYHgLduPipDlKWBNa_rCIHk6KMzx9etPuyYWvCWyzQPoA. The name of the pattern is mosey legwarmers by knitty.
DIRECTIONS
RIGHT LEGWARMER
CO 76[108] sts. If using double-point needles, divide sts between needles.

Place marker and join to begin working in the round, being careful not to twist.

Work in 2x2 Rib until work measures 3 inches.

Eyelet Round: Work 24[36] sts in pattern, k2tog, yo, p2, yo, k2tog, continue in pattern to end.
Continue in 2x2 Rib until work measures 9 inches.

Next Round: [M1, p38(54)] twice. 78[110] sts.
K 1 round.

Next Round: [P2, k2] once[twice], work Back Panel over next 12 sts, [k2, p2] once[twice], k2[3], work Cable Pattern over next 54[76] sts, working pattern repeat section 2[3] times, k2[3]. This round establishes pattern for legwarmer.

Continue in pattern until all rounds of Back Panel have been worked 3 times, then work 1 round more (Round 1 of Back Panel); you will have just completed Round 7 of Cable Pattern.

K 1 round. P 1 round.
BO all sts.
I am stuck on the eyelet round, after doing the 3 inches in rib. Do the directions mean to knit only one row or do you think it means to do the 20 row cable pattern?
Cable Pattern
(Worked over a multiple of 22 sts + 10):
Rounds 1-5: P2, k6, p2, [k12, p2, k6, p2] to end.
Round 6: P2, C6B, p2, [k12, p2 C6B, p2] to end.
Rounds 7-10: Work as for Rounds 1-5.
Round 11-15: K10, [k1, p2, k6, p2, k11] to end.
Round 16: K10, [k1, p2, C6B, p2, k11] to end.
Rounds 17-20: Work as for Rounds 11-15.

Edited post
After working 3" of rib, next work the eyelet round, as written, once. Then woek the next round where you M1s to get correct stitch count to begin the cable patterns on the next round. You will work 2 rounds after the 3" of rib before continuing for total of 9" of ribbing before beginning the cable patterns.

 

[sztain]

Thank you

 

[Nanamel14]

One eyelet round (most likely to thread the cord through later).

Quote from pattern:

Eyelet Round: Work 24[36] sts in pattern, k2tog, yo, p2, yo, k2tog, continue in pattern to end.
Continue in 2x2 Rib until work measures 9 inches.

:sm24: :sm24:

 

[sztain]

Thank you